If there's a matting
solution - Mats and Frames Ltd will provide it. We have a
comprehensive range of mats and matting - all available to bespoke
requirements. If you have any questions about the suitability of one
of our floor matting products for a particular application - or need
more information of any kind - please don't hesitate to get in
touch. A member of the Mats and Frames Ltd team will always be happy
to assist you with additional details or expert advice. Our helpful
staff have a thorough understanding of the complete customized logo
mat and general floor matting production process - from research and
development to graphic design and final manufacturing.We understand
that the most frustrating aspect of buying customized mats and floor
matting is often the long lead times that are commonplace in the
industry and we have established a uniquely efficient infrastructure
that enables us to offer our customers the fastest possible
completion and delivery turnaround. The majority of our matting is
available on a next day delivery basis.
Sweep the
mat with a broom
or vacuum in the
direction of the
profiles (not
perpendicular to
the direction of
the profiles).
Periodic maintenance
Remove the
mat fro the
matwell.
Vacuum the
mat and the mat
thoroughly.
Carefully
replace the mat.
Symmetric
mats can be
reversed.
Thorough maintenance
Remove the
mat from the
matwell.
Vacuum the
matwell and the
mat thoroughly.
Clean the
mat with a
high-pressure
cleaner, a
garden hose or a
hard scrubbing
brush, in
combination with
water and a
universal
detergent.
Let the mat
dry completely
(preferably in
an upright
position).
MAINTENANCE PRODUCTS
Does not
react to
Alcohol, aldehydes, alkalis,
ethers, ketones, soaps and
synthetic detergents, (sea)water,
solvents used for dry cleaning.
Resistant to
Alkalis.
Reacts
to
HCI, H2SO4,
oxalic acid and bleaching agents
(i.e. not resistant to bleaching
agent containing 12.5% active
chloride (as usually available on
the market)
Thoroughly vacuum
the TopguardŽ mat and the
matwell.
Clean the mat with
a high-pressure cleaner,
a garden hose or a hard scrubbing
brush,
in combination with water and a
universal detergent.
Let dry completely, preferably in an
upright position.
SPECIFICATIONS
Description:
Sectional drying mat
consisting of new,
high-quality rubber
(no recycled
material). Available
in closed or open
construction.
The rubber strips
consist of layers of
rubber interwoven
with continuous and
discontinuous
polyester (grey
textile) or
polyamide (coloured
textile) fibres. The
textile is visible
on both sides of the
mat (reversible).
The rubber strips
are separated by
profiles. The strips
and the profiles are
kept in place by
steel wires running
at right angles
through the strips.
Applications:
These mats are suitable
for indoor use and for
use in covered outdoor
areas. They are
recommended for heavy
traffic entrance areas
(more than 100 persons
per hour).
Profiles:
Aluminium, PVC or brass
profiles with a height
of 11.4 mm or 15 mm.
Rubber strips:
The rubber strips are 12
mm or 18 mm high and 15
mm wide. All rubber
strips are new (no
recycled material).
The fact that the fibres
are continuous
guarantees the strength
and the long life of the
mat. The rubber has a
shore A hardness 0171
and a density of 1,23
T/m3. Textile is grey or
coloured.
Steel wire:
Hard, fully cold
galvanised steel wire
(2.3 mm thick). The
distance between the
stainless steel wires is
38 mm maximally.
Dimensions and
finish:
The total mat height is
12 mm or 18 mm. The mat
is made to size in the
factory. Practically all
shapes are possible.
Available in closed or
open construction (3 mm,
6 mm or 16 mm) with
single or double rubber
strips. Possibility to
incorporate a logo,
drawing or text.
Installation:
The mats can be placed
in a matwell with a
depth of 15 mm or 20 mm
or directly on the
floor; in that case, a
ramping profile is
recommended.
Warranty:
10 years for structural
defects in case of
normal use (in
accordance with the
warranty conditions).
Tests:
This mat
meets the standards of
the following tests
carried out by the
University of Gent:
Fire and smoke
tests: (in walking
direction) B s1
Colourfastness
tests: class 7 (ISO
105 B02 (1994))
Wronz (wear)
tests: samples
available for
inspection
Moisture
absorption tests:
according to test
report 02-785
