If there's a matting
solution - Mats and Frames Ltd will provide it. We have a
comprehensive range of mats and matting - all available to bespoke
requirements. If you have any questions about the suitability of one
of our floor matting products for a particular application - or need
more information of any kind - please don't hesitate to get in
touch. A member of the Mats and Frames Ltd team will always be happy
to assist you with additional details or expert advice. Our helpful
staff have a thorough understanding of the complete customized logo
mat and general floor matting production process - from research and
development to graphic design and final manufacturing.We understand
that the most frustrating aspect of buying customized mats and floor
matting is often the long lead times that are commonplace in the
industry and we have established a uniquely efficient infrastructure
that enables us to offer our customers the fastest possible
completion and delivery turnaround. The majority of our matting is
available on a next day delivery basis.
Remove the
dirt from the
matwell using a
brush or a
vacuum cleaner
after having
rolled up the
mat.
Periodic maintenance
Roll up the
mat and remove
the dirt
accumulated
under the mat
with a vacuum
cleaner or with
a dustpan and
brush.
Coarse,
sticky or wet
dirt remaining
on the mat is
removed unsing a
hard scrubbing
brush in
combination with
water and a
universal
detergent.
Thorough maintenance
The mat is
removed from the
matwell for
thorough
cleaning.
Vacuum the
matwell and
clean with
water.
Clean the
mat with a
high-pressure
cleaner or with
a hard scrubbing
brush, in
combination with
water and a
universal
detergent. Let
the mat dry
during a few
hours before
placing it back
in the mat well.
MAINTENANCE PRODUCTS
Does not
react to
Alcohol, aldehydes, alkalis,
ethers, ketones, soaps and
synthetic detergents, (sea)water,
solvents used for dry cleaning.
Resistant to
Alkalis.
Reacts
to
HCI, H2SO4,
oxalic acid and bleaching agents
(i.e. not resistant to bleaching
agent containing 12.5% active
chloride (as usually available on
the market)
Remove
the dirt accumulated
under the mat with a
vacuum cleaner or with a
dustpan and brush.
Clean
the mat with a
high-pressure cleaner, a
garden hose or a hard
scrubbing brush in
combination with water
and a universal
detergent. Let dry
completely.
SPECIFICATIONS
Description:
A rollable entrance
mat consisting of
single or double
aluminium supporting
profiles and a
walking surface
composed of drying
rubber strips and/or
scraping nylon
brushes with or
without scraping
profiles. PVC
connecting pieces
keep the profiles
and the strips
and/or brushes in
place.
Applications:
These mats are suitable
for indoor use and for
use in covered outdoor
areas. They are highly
recommended for average
traffic entrance areas
(less than 100 persons
per hour).
Brushes:
UV-stabilised brushes
made of nylon 6.6. The
discontinuous brushes
are secured in a PVC
profile that is embedded
in an aluminium profile.
Height of the brushes: 7
mm. The continuous
brushes are pressed
together in an aluminium
profile. Height ofthe
brushes: 5 mm or 10 mm.
Profiles:
The profiles have a
width of 18 mm or 35 mm.
Rubber strips:
The rubber strips are 15
mm wide. All rubber
strips are new (no
recycled material).
The fact that the fibres
are continuous
guarantees the strength
and the long life of the
mat. The rubber has a
shore A hardness of 71
and a density of 1,23
T/m3. Textile is grey or
coloured.
PVC connecting pieces:
The black connecting
strips consist of rigid
PVC.
Dimensions and
finish:
The total mat height is
18 mm or 25 mm. The mat
is made to size in the
factory. Practically all
shapes are possible.
Available in open
construction (4 mm) with
single or double rubber
strips and with or
without brushes.
For more demanding
environments, this mat
can be combined with
aluminium scraping
profiles.
Installation:
The mats can be placed
in a matwell with a
depth of 20 mm or 25 mm
or directly on the
floor; in that case, a
ramping profile around
the edges of the mat is
recommended.
Warranty:
5 years for structural
defects in case of
normal use (in
accordance with the
warranty conditions).
Tests:
This mat
meets the standards of
the following tests
carried out by the
University of Gent:
Fire and smoke
tests: B S1
Colourfastness
tests: class 6 or 7
(ISO 105 B02 (1994))
Wronz (wear)
tests: samples
available for
inspection
Moisture
absorption tests:
according to test
report 02-785 A
Extra Weight
Compared to Dry
State
Wet
After 1 hour
After 24 hours
PolyGuard Light
with rubber
286.30 gr/m2
207.59 gr/m2
6.11 gr/m2
ELEMENTS TO BE
CONSIDERED WHEN
ORDERING
Version:
Dry
Scrub
Mix
Mathoogte:
18 mm*
25 mm
Textile:
Single
Double
Colour of textile:
Grey
Black
Brown
Blue
Green
Coco
Red
Colour brushes:
Grey*
Brown*
Red*
Black◊
Blue*
Green*
Terracotta*
Coco*
Anthracite*
Available with or without
scraping profile
* - Only for dry with or
without continuous brush
*
- for discontinuous
brushes
◊
- for
continuous brushes
