If there's a matting
solution - Mats and Frames Ltd will provide it. We have a
comprehensive range of mats and matting - all available to bespoke
requirements. If you have any questions about the suitability of one
of our floor matting products for a particular application - or need
more information of any kind - please don't hesitate to get in
touch. A member of the Mats and Frames Ltd team will always be happy
to assist you with additional details or expert advice. Our helpful
staff have a thorough understanding of the complete customized logo
mat and general floor matting production process - from research and
development to graphic design and final manufacturing.We understand
that the most frustrating aspect of buying customized mats and floor
matting is often the long lead times that are commonplace in the
industry and we have established a uniquely efficient infrastructure
that enables us to offer our customers the fastest possible
completion and delivery turnaround. The majority of our matting is
available on a next day delivery basis.
Remove the
dirt from the
mat by vacuuming
in the direction
of the profiles
(not
perpendicular to
the direction of
the profiles).
Periodic maintenance
Roll up the
mat and remove
the dirt
accumulated
under the mat
with a vacuum
cleaner or with
a dustpan and
brush.
Coarse,
sticky or wet
dirt remaining
on the mat is
removed using a
hard scrubbing
brush in
combination with
water and a
universal
detergent.
Thorough maintenance
The mat is
removed from the
matwell for
thorough
cleaning.
Vacuum the
matwell and
clean with
water.
Clean the
mat with a
high-pressure
cleaner or with
a hard scrubbing
brush, in
combination with
water and a
universal
detergent. Let the mat
dry during a few
hours before
placing it back
in the matwell.
MAINTENANCE PRODUCTS
Does not
react to
Alcohol, aldehydes, alkalis,
ethers, ketones, soaps and
synthetic detergents, (sea)water,
solvents used for dry cleaning.
Resistant to
Alkalis.
Reacts
to
HCI, H2SO4,
oxalic acid and bleaching agents
(i.e. not resistant to bleaching
agent containing 12.5% active
chloride (as usually available on
the market)
Remove
the dirt accumulated
under the mat with a
vacuum cleaner or with a
dustpan and brush.
Clean
the mat with a a garden
hose or a hard scrubbing
brush in combination
with water and a
universal detergent.
SPECIFICATIONS
Description:
Rollable entrance
mat available with
different inserts
(drying, scrubbing,
needle felt and/or
vinyl insert). These
inserts are mounted
in aluminium
supporting profiles
that are kept in
place by PVC
connecting strips.
Thanks to the many
combination
possibilities, these
mats offer a
solution for all
types of dirt.
Applications:
These mats are suitable
for indoor use and for
use in covered outdoor
areas. They are highly
recommended for low to
average traffic entrance
areas (less than 100
persons per hour)..
Profiles:
The profiles have a
height of 8 mm, 15 mm or
20 mm and a width of 32
mm.
Inserts:
The inserts have a
height of 5 mm and a
width of 30 mm.
4 different types of
inserts are available:
CleanMid@ Dry:
drying insert
consisting of 100%
multifilaments per m2
(approximately
50,450,000
multifilaments per m2)
CleanMid@ Scrub:
scrubbing insert
consisting of
45,400,000
multifilaments per
m2 and 1,001,000
monofilaments per m2.
CleanMid@ Needle
felt: needle felt
insert consisting of
100% polypropylene
with a weight of
approximately 1200
g/m2.
(sound insulation:
DIN52210 23dB).
CleanMid@Vinyl:
insert consisting of
flexible PVC with a
shore density of 80
to 90.
Brushes:
UV-stabilised brushes
made of nylon 6.6.
The discontinuous
brushes are secured in a
PVC profile that is
embedded in an aluminium
profile. Height of the
brushes: 7 mm. The
continuous brushes are
pressed together in an
aluminium profile.
Height of the brushes: 5
mm or 10 mm.
PVC connecting strips:
The black connecting
strips consist of rigid
PVC.
Dimensions and
finish:
The total mat height is
20 mm or 25 mm. The mat
is made to size in the
factory. Practically all
shapes are possible.
Available with different
types of inserts
alternating with brushes
or scraping profiles.
Installation:
The mats can be placed
in a matwell with a
depth of 20 mm or 25 mm
or directly on the
floor; in that case, a
ramping profile is
recommended.
Warranty:
2 years for structural
defects in case of
normal use (in
accordance with the
warranty conditions).
Tests:
This mat
meets the standards of
the following tests
carried out by the
University of Gent:
Fire and smoke
tests: B S1
Colourfastness
tests: class 6 or 7
(ISO 105 B02 (1994))
Wronz (wear)
tests: samples
available for
inspection
Moisture
absorption tests:
according to test
report 02-785 A
